Train Strong, Fight Strong Patch: Where to Place It on Your Kit

By Archangel Tactical - Archangel Tactical Gear | Published: 2026-11-03

Category: How-to Guides

A practical, step-by-step guide to placing your Train Strong, Fight Strong patch on plate carriers, backpacks, and range bags, with hook-and-loop tips and common mistakes to avoid.

Quick answer

Place your Train Strong, Fight Strong patch on a clean, flat hook-and-loop panel that stays visible and doesn't interfere with your gear, such as the upper chest of a plate carrier, the top lid of a backpack, or the front of a range bag. Test the spot with the patch before pressing it down firmly.

Why placement matters more than you think

A morale patch like the Train Strong, Fight Strong patch is more than decoration—it's a statement about your mindset. But where you put it affects how well it stays put, how easy it is to see, and whether it gets in the way of your gear. Put it somewhere that won't snag on slings, pouches, or doorways, and avoid spots that rub against your body or other equipment.

Also consider visibility: a patch on the back of your plate carrier is great for others to see, but you won't see it yourself. A patch on your backpack lid is visible to you and others when you set the bag down. Think about who you want to see it and when.

Hook-and-loop tips for a secure hold

The patch has a hook backing that mates with loop panels. Over time, lint and debris can clog the hooks and reduce grip. Before attaching, clean the loop panel with a soft brush or tape to remove dust. Also, avoid placing the patch over seams or uneven surfaces—it won't sit flat and may peel at the edges. If you need to reposition, peel slowly from one corner to avoid damaging the backing.

Step-by-step patch placement

Choose your spot: Pick a flat, clean hook-and-loop panel on your plate carrier, backpack, or range bag. Common mistake: placing it over a seam or zipper, which prevents full contact and causes peeling. Make sure the panel is large enough for the patch to sit flat without overhang.
Clean the loop panel: Brush or wipe the loop surface to remove lint and dirt. Common mistake: skipping this step, which lets debris clog the hooks and weakens the hold. A quick clean before each attach keeps the grip strong.
Test the position: Lightly press the patch in place and check that it doesn't interfere with straps, pouches, or your line of sight. Common mistake: rushing to press it down firmly before testing, making it harder to reposition. Move the patch around to see what feels right before committing.
Press firmly: Once satisfied, press the patch down evenly for a few seconds. Common mistake: pressing only the center, leaving edges loose to catch on gear. Run your fingers along all edges to ensure full contact.
Check regularly: After use, check that the patch is still secure and clean the hooks if needed. Common mistake: ignoring a loose corner, which can lead to losing the patch. A monthly quick check prevents surprises.

Product facts

Specialty Patch - Train Strong, Fight Strong - Archangel Tactical Gear: Specialty patch with the message “Train Strong, Fight Strong” and a hook backing. The hook backing means it attaches to any loop panel, so you can move it between gear as needed.
Specialty Patch - Train Strong, Fight Strong - Archangel Tactical Gear